Quote: (06-24-2014 12:34 PM)birdie num num Wrote:
Some riders avoid the slime filled tubes because it adds weight. That's probably a factor if you are a competitive racer, but insignificant if you are a recreational rider. My bike has tires with kevlar belts. That has greatly reduced the amount of flats.
I don't know about insignificant. Rotational weight is the first weight you will be pleased you saved on a bike- and you need to start at the outside of the wheels with the tires. This leads to quicker, easier acceleration.
You want the lightest tires and tubes you can get, but still retain some puncture protection. Kevlar belts as you mention are great, and the better quality tires have kevlar rather than steel beads for weight saving.
I would carry a spare tube rather than a repair kit- quicker as you don't have to wait for the rubber to vulcanise, and you don't need to worry about not doing it right and having another flat in twenty minutes.
Be sure to check the tire for what caused the flat in the first place. Another good tip is to use talcum powder inside the tire and all around the bead to stop the tube sticking to the rubber, and to make it much easier to get it on the rim. Another plus is that it makes it look like you can afford a really good coke habit...
![[Image: lol.gif]](https://rooshvforum.network/images/smilies/new/lol.gif)
They who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety- Benjamin Franklin, as if you didn't know...